
FB160-4A
160 kVAPrime power at 50 Hz
- Leyland engine
- H6G4DE160
- Fuel tank
- 325 litres
- Supply
- 415/230 V
An FG Wilson diesel generator with the Leyland H6G4DE180 engine and Leroy Somer alternator. Explore the published specification with FW Power.

Review the largest single load step and whether equipment can start in sequence. A higher total rating does not remove the need to assess transient behaviour, especially where motors, UPS systems or sensitive controls share the supply.
The 6-litre Leyland engine operates at 1,500 rpm. Its standard equipment listing includes a 325-litre fuel tank and 320 A circuit breaker. Our team can review how these fit your load, required running time and installation.
Use these details to compare models and prepare an enquiry. Confirm the supplied configuration, site derating and operating limits against the approved technical documents.
The rating below is prime power. A separate standby rating is not stated here. Contact our team to confirm dimensions, weight, fuel consumption and noise measurement conditions for your supplied configuration.
Alternator IP23 is an alternator classification, not a weatherproof rating for the complete generator enclosure.
Ask our team about this specification| Manufacturer | FG Wilson |
|---|---|
| Generator model | FB180-4A |
| 50 Hz prime power | 180 kVA |
| Frequency | 50 Hz |
| Voltage | 415/240 V |
| Engine speed | 1,500 rpm |
| Emissions classification | CPCB IV+ |
| Engine make | Leyland |
| Engine model | H6G4DE180 |
| Displacement | 6 litres |
| Governor | Electronic A0 |
| Bore × stroke | 104 × 118 mm |
| Compression ratio | 16.5:1 |
| Alternator brand | Leroy Somer |
| Alternator model | Awaiting confirmation |
| Alternator protection | IP23 |
| Alternator insulation | Class H/H |
| Voltage regulation | ±1% (published alternator specification) |
| Fuel tank capacity | 325 litres |
| Listed circuit breaker | 320 A |
The FB180-4A datasheet is awaiting specification confirmation. Contact our team for current technical documentation and your project requirements.
The alternator model and model drawing are being checked before a PDF download is offered.
Discuss generator supply, changeover, delivery and service with TEAM FW Power. Controls, fuel arrangements, acoustic requirements and site connections should be agreed as part of the quotation.
This model is listed as CPCB IV+ compliant. That classification must be checked against your destination and intended use; it is not a statement of UK/EU Stage V approval.
For an automatic standby application, confirm the engine-start interface and transfer sequence. A conventional ATS introduces a changeover interruption. Tell us about any loads that require UPS support or another continuity solution.
Running time depends on usable fuel capacity and the actual load. The listed tank volume alone does not establish a guaranteed number of operating hours.
Tell us what you need to power, where it will operate and when you need it. Our team can discuss generator selection, changeover equipment, delivery, installation and ongoing service.
Compare the published prime outputs, then let our team help assess the application.
Tell us what you need to power. We’ll help you find the right solution.